Stainless steel, high alloyed
Notes: We guarantee a straightness deviation of at least 0.5 mm or better. Ultrasonic testing, crack testing, sawing and grinding can also be also be offered as contract work.
Rust and acid resistant (stainless) steels | |
|---|---|
EN 10088-3 / AISI | |
| Ferritic and martensitic steel | Austenitic steels |
| All grades +A (annealed) / +QT (quenched and tempered) on request | All grades quenched / resp. +AT (solution annealed) |
| 1.4005 / 416 | 1.4301 * / 304 |
| 1.4016 / 430 | 1.4305 * / 303 |
| 1.4021 / 420 A | 1.4306 / 304 L |
| 1.4028 / 420 F | 1.4307 * / 304 L |
| 1.4034 / 420 | 1.4401 * / 316 |
| 1.4035 | 1.4404* / 316 L |
| 1.4057 / 431 | 1.4435 / 316 L |
| 1.4104 / 430 F | 1.4541 / 321 |
| 1.4105 / 430 F | 1.4570 / 303 Cu |
| 1.4112 / 430 B | 1.4571 / 316 Ti |
| 1.4122 / 430 C | |
Further steel grades on request
* also available in better machinable quality.
Dimensions | Drawn | Peeled | Ground |
|---|---|---|---|
Round | 6 - 32 mm | On request | 5 - 80 mm |
Hexagonal | 8 - 27 mm | ||
Square | 8 - 20 mm | ||
Profile | On request | ||
Tolerance Ranges | ISO 11 - ISO 9 | ISO 11 - ISO 9 | ISO 11 - ISO 6 |
Special tolerances on request Special surface roughness requirements by arrangement | |||
Crack Detection | Eddy-current and US inspection | ||
Bar Length | From 1.0 to 7.2 m | ||
